Introduction the six measures of steam trap

    The basic function of the steam trap is the steam system,condensate in the air and carbon dioxide gas emissions as soon as possible; at the same time maximally automatically prevent steamleakage.

    Six measures

    Selection, installation of hydrophobic valve suitable as long as steam through, the problem does not appear frozen. But if the broken steam, condensate will be in the heat exchanger or with the formation of a vacuum tube steam. This will occur in the frozenbefore stop condensation water free emitted from the system. So, toa vacuum to be installed between the discharge device and trapbreaker. From the trap to the back instead of using gravity discharge pipe, drain valve and discharge pipe should be used with artificial emissions or emissions control measures with antifreezeautomatic discharge. Also, when the number of traps with trap stations installed in time, to trap heat to prevent freezing.

    Hydrophobic valve antifreezing measures:

    1.Traps do not choose the size too large.

    2.Keep the trap emission lines as short as possible.

    3.Downward sloping trap discharge pipeline, to accelerate the speed of gravity discharge.

    4.Water return line with insulation trap emission pipeline andcondensate.

    5.When the condensate return water pipeline when exposed to atmospheric conditions, should consider with heat pipe.

    6.If the returning water increases, the vertical discharge pipe topipe adjacent to a backwater pipe at the upper part of thedischarge, and the discharge pipe and discharge pipe with insulation traps.

Basic Rubber Tensioner

       Chinabase Machinery is a group of manufacturing facilities, offering one-stop solution for mechanical power transmission products in China. We can supply a full-range of power transmission products, such as  power transmission equipment,chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks., Chinabase is able to offer custom, cost-optimized solutions in accordance with customer drawings - such as ready-to-install machine parts and profiles - in addition to our standard products.

      Our product range also covers locking assemblies (clamping elements/locking device), taper bushes, QD bushes, bolt-on hubs, torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, Linear Bearing,universal joint, rod ends and yokes. Our products are used in many different industry sector, like in automation engineering, drive engineering, conveyor technology, assembly and handling technology, packaging industries, the beverage, food and medical engineering, pharmaceutical production, and laboratory equipment.