The basic function of trap is the steam system, condensate in theair and carbon dioxide gas emissions as soon as possible; at the same time maximally automatically prevent steam leakage. Steam traps many varieties, each with different performance. Steam traps,the first of its characteristics should be selected to meet the steamheating equipment, the best run, before considering other objective conditions, such choices you need to trap is the correct and effective.
Machine installation
The editor
For details of installation of traps, please refer to the respectiveinstructions. Here will be described in the notes in the installation process.
(1) is arranged in the ascending part of the occasion
In general, the trap is installed below the condensation water discharging device position. However, if you want to the drain valve is installed above the condensation water discharging device, you will need to install lift fitting in the drain valve in front, so that thecondensed water can be smoothly into the trap. Ascension joint (liftfitting): also known as "suction joint". When the condensed water discharge site is relatively low, it can be condensed water is sucked to the heights and forward.
(2) the export side return pipe
For piping diameter condensation drain valve discharge watershould have a certain margin, at least should be able to prevent the impact of steam hammer or pressure loss. In addition, the recovery of water pipe and a plurality of sets (return pipe connection, shouldmake) inflow angle, in order to facilitate the condensed water flow.
(3) the export side pipe inundated occasions
The condensed water discharged into the drainage ditch cases, if the risk of drain directly into the water easy to cause condensationwater splash. If you must be under water situations, in order to prevent the water flow to the hydrophobic valve steam stopdrainage ditch fault occurs, should be open hole, or install vacuumregulating valve in the pipe.
(4) a condensed water collecting device settings
In the steam trap pipe arranged it, need to design a condensed water collecting device.
On occasion during the early stage and fast flow, it can effectivelycollect the condensed water, advantageous to the hydrophobicvalve work better. If there is no design of condensate water collecting device, is easy to appear the condensed water is notdischarged, garbage and scale blocking phenomenon such asentrance.
 |
| Fluid Couplings |
(5) the condensing water lines of different pressure
The pressure different condensing water line, pressure design ofcondensed water recovery for each different pipe, or install flashleg after recovery. Once the low recovery tube into the condensed water and high pressure, will lead the condensed water again evaporated because of condensed water temperature difference,thereby adversely affecting noise steam hammer.
Chinabase Machinery is a group of manufacturing facilities, offering one-stop solution for mechanical power transmission products in China.
Our product range also covers locking assemblies (clamping elements/locking device), Agricultural Chain，taper bushes, QD bushes, bolt-on hubs, torque limiters, power transmission equipment,shaft collars, motor bases and motor slides, chain detachers, Timing Belt Pulleys,chain guides, universal joint,Timing Belt Pulleys, rod ends and yokes. Our products are used in many different industry sector, like in automation engineering, drive engineering, conveyor technology, assembly and handling technology, packaging industries, the beverage, food and medical engineering, pharmaceutical production, and laboratory equipment.
Chinabase is able to offer custom, cost-optimized solutions in accordance with customer drawings - such as ready-to-install machine parts and profiles - in addition to our standard products. Our internal Application Technology department and field staff are happy to provide free advice on custom solutions.
没有评论:
发表评论