Introduction the Bimetal thermostatic type steam valve

     Hot static type steam traps supercooling degree is relatively large,generally the undercooling of 15 degrees to 40 degrees, it can use a part of sensible heat of condensation water, the valve is always there before the high-temperature condensed water, no steam leakage, energy saving effect is remarkable. In steam pipes,heating pipes, small heating equipment, heating equipment, small heating temperature less demanding equipment, the best trap.

     The main part of the double metal trap is a bimetal temperature sensing element, with the steam temperature thermal deformation,and promote heart valve switch valve. Bimetallic trap is provided with an adjusting bolt, can be adjusted according to the needs ofthe general temperature, undercooling range is lower than the saturation temperature 15 ℃ -30 ℃, back pressure is higher than 70%, to row non condensing gas, not afraid of cold, small volume,resistant to water hammer, high pressure resistance, can be installed anywhere. There are pairs of metal fatigue, need regularadjustment.

Fluid Couplings

     When the device is just starting, low-temperature condensate pipeline, two metal sheets are flat, and the elastic spring heart valve, the valve in the open position. When the condensate water temperature gradually increased, bimetal temperature sensing element began to bend, and the heart valve into the closedposition. In the condensate to saturation temperature before the trap began to close. Double metal sheet with the steam temperature control valve, gas drainage resistance.

    Chinabase Machinery is a group of manufacturing facilities, offering one-stop solution for mechanical power transmission products in China. 

  Our product range also covers locking assemblies (clamping elements/locking device), taper bushes, QD bushes, bolt-on hubs, torque limiters, shaft collars, motor bases and motor slides, chain detachers,Engineering Chain， chain guides, universal joint, rod ends and yokes. Our products are used in many different industry sector, like in automation engineering, drive engineering, conveyor technology, Tyre Coupling，assembly and handling technology, packaging industries, the beverage, food and medical engineering, pharmaceutical production, and laboratory equipment.

    Chinabase is able to offer custom, cost-optimized solutions in accordance with customer drawings - such as ready-to-install machine parts and profiles - in addition to our standard products. Our internal Application Technology department and field staff are happy to provide free advice on custom solutions.