Introduction the Note of Pressure relief valve

    Matters needing attention

   1 in order to facilitate the operation and maintenance, the valve installed in the level normally upright pipe.

   2 valve must be installed with flow Party strictly in accordance withthe direction arrow on the body

To the same. If the water is not clean, contain some impurities, mustinstall the filter in the upstream of the intake valve.

   3 in order to prevent over pressure valve after the pressure from the valve outlet, shall be not less than the installation of a pressure reducing valve 4M.

   4 valve back to play a role only in the pipeline, in order to prevent water hammer damage, small expansion tank can be installed, to prevent damage to pipes and valves, filters must be installed before the inlet valve, the expansion tank must be installed after the valve outlet!

Roller Chains Guide 

    5 if you need to install the valve in the hot water system, you mustcheck valve is installed between the valve and expansion tank. This is to allow expansion due to thermal expansion tanks absorb theincreased volume of water, but also to prevent water backflow valveor pressure fluctuations on the impact, to ensure that the valvework for a long time.

    Chinabase Machinery is a group of manufacturing facilities, offering one-stop solution for mechanical power transmission products in China. 

    Our product range also covers locking assemblies (clamping elements/locking device), taper bushes, QD bushes, bolt-on hubs, torque limiters, shaft collars, timing belt，motor bases and motor slides, chain detachers, chain guides, universal joint, rod ends and yokes. 

    Chinabase is able to offer custom, cost-optimized solutions in accordance with customer drawings - such as ready-to-install machine parts and profiles - in addition to our standard products. Our internal Application Technology department and field staff are happy to provide free advice on custom solutions.