The Common fault of displacement sensor（二）

    Common fault displacement sensor

    5.The power supply voltage must be stable, industrial voltageneeds to meet the stability, ± 0.1[%] for example, the reference voltage is 10V, allows changes ± 0.01V, if not, will cause the display of the trap wave case.

    But if the show volatility does not exceed the fluctuation of voltagefluctuation. This time, so the electronic scale is normal.

    6.The installation of the linear displacement sensor on the neutralneed good parallelism, but allows error is ± 0.5mm, angle is allowed error of ± 12 °. But if the parallelism error and angle error is too large, so there will be a display of digital. So when this happens, we must adjust the parallelism and angle.

Basic Rubber Tensioner

     7.In the process, must pay attention, the three line electronic ruler is not to take the wrong, power line and an output line is notchangeable. If the above line is connected correctly, will appearlinear error is large, it is difficult to control, the control precisionwill be very poor, and the display is very easy to appear the beating phenomenon and so on.

   Chinabase Machinery is a group of manufacturing facilities, offering one-stop solution for mechanical power transmission products in China. 

     Our products are used in many different industry sector, like in automation engineering, drive engineering, conveyor technology, assembly and handling technology, packaging industries, the beverage, V-Belt Pulley，food and medical engineering,Chain Coupling， pharmaceutical production, and laboratory equipment.

    Chinabase is able to offer custom, cost-optimized solutions in accordance with customer drawings - such as ready-to-install machine parts and profiles - in addition to our standard products. Our internal Application Technology department and field staff are happy to provide free advice on custom solutions.