Introduced of Automatic transmission and the control switch is

      Cars equipped with automatic transmissions also usually provide a lot of control switch, is used to control the driving condition of the vehicle. Control switch is relatively common:

    Overdrive switch (O/D): the automatic transmission of the high-grade usually overdrive. Overspeed switch closed, D gear driving,automatic transmission will not be able to change into overdrive.Usually in the adverse slope and road surface condition should be considered when the switch is closed.

Mode selection switch: most automatic gearbox will provide the mode selection switch, in different modes, shift schedule of automatic transmission, so its performance will vary. Commonmode has the following kinds:

     Economic mode: in this mode, the fuel economy of the automatic transmission is high, fuel saving performance.

Y2 Series Motor

    Power mode: in this mode, the engine is running in the power range, so that the car has high dynamic performance and climbing ability.

    The standard model: also known as the common mode. This model considering economy and power.

Kickdown switch: when the accelerator pedal position over thesolar term door fully open position, the switch is turned on,automatic down a gear transmission, in order to improve the acceleration performance of the car.

     Keep the switch, also known as gear locking switch or manual shiftswitch. Some cars equipped with automatic transmissions with the switch, when selected, the transmission does not automaticallyshift, the driver through the manipulation of the selector (when theselector lever is manually selected gear shift lever).

     Chinabase Machinery is a group of manufacturing facilities, offering one-stop solution for mechanical power transmission products in China. We can supply a full-range of power transmission products, such as chains,Cast Iron Chain,,Engineering Chain, sprockets and plate wheels, pulleys, gearboxes, motors, couplings,Single Speed Reducer, gears and racks. Our product range also covers locking assemblies (clamping elements/locking device), taper bushes, QD bushes, bolt-on hubs,Single Speed Reducer, torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod ends and yokes. Our products are used in many different industry sector, like in automation engineering, drive engineering, conveyor technology, assembly and handling technology, packaging industries, the beverage, food and medical engineering, pharmaceutical production, and laboratory equipment.