Auto Parts comprehensive interpretation - Starter

Starter (starter) called motor which generates power by a DC motor, the starter gear transmits power to the flywheel ring gear, flywheel, crankshaft and start the engine.
As we all know, the engine starting needs external support, auto starter is to play this role. Broadly speaking, the starter with three components to realize the entire starting process. DC motors and introducing a current from the battery to the starter drive gear generates mechanical motion; transmission mechanism of the drive gear into the flywheel ring, and after starting the engine can be automatically disengaged; starter circuit by a solenoid on-off switch to control. Wherein the motor is a starter main internal components.

Motor Hangzhou Chinabase

    Engine to operate under its own power before, you need outside help to rotate. Engine outside help transition from rest to operate on their own in the process, known as the engine starts. Common way of starting the engine with manpower start, auxiliary gasoline engine starter and electric starter three forms. Human start using rope or hand way, simple but inconvenient, but labor-intensive, only applies to some of the small power of the engine, the car in some way as a backup only retains; auxiliary gasoline engine starter is mainly used in high-power diesel engines; electric start mode is simple, rapid start, with repeated starting capability, and can be remote controlled, so it is widely used in modern cars.

    Starter maintenance:
    The process of starting the engine starter, the battery from the battery into 300 ~ 400Ah, so in order to prevent an overcurrent or damaged battery phenomenon, starting time not more than 5s; winter prone to the phenomenon is difficult to start, start times each start time not too long, also starts each time should be left at appropriate intervals.

    Starter Troubleshooting:
    1, the battery power is low or no power, so there can not rotate or turn slow starter failure.
    2, starter thread loose or fall off, switch or adsorption switch failure.
    3, brush face brush wear or incorrect, spring weakness, so that the rectifier is bad.
    4, the excitation coil or armature coil short circuit and open circuit.
    5, rectifiers defaced, mica bulge, resulting in poor contact brush and rectifiers.

 Hangzhou chinabase is the Motor Base components supplier, any need visit their site: http://www.power-transmissions.com/motorbase/MOTORBASE.htm